Victony WA305 Extender Setup

Connect to your Victony WA305 Extender Setup, join its WiFi network, and then open a web browser to “ap.setup” to set it. After choosing your current WiFi network and logging in using the default credentials, you’re done. Enjoy smooth access to wider WiFi coverage.

Victony WA305 wifi setup instruction guide

  1. Plug the Victony WA305 to a power outlet that is nearby your WiFi network.
  2. Connect the Victony WA305 to a power outlet which is close to your WiFi signal.
  3. The extender typically has a sticker that has the default password on it.
  4. To open the setup page for the extender, press Enter.
  5. To pick and enter a username and password to your present WiFi network, follow the directions displayed on the screen.
  6. For the extender  you may choose a new network name (SSID) and login.
  7. Save your setups after changing the extender, then give it a chance to reset.
  8. Connect your devices to the new extended WiFi network shortly as the extender restarts.

Useful features of victony WA305 extender setup

  • The setup of the Victony WA305 extender is quick and simple .
  • Thanks to its easy one-button setup.
  • The WiFi bands the extender supports were 2.4GHz and 5GHz.
  • enable the expansion of each type of network to enhance coverage.
  • Signal strength hints and light-emitting on the WA305 enable it to be easy to find.
  • The best place for WiFi coverage at its best.
  • You can connect wired devices to your extended Ethernet port
  • For an honest connection, use a WiFi network.
  • The WA305 works with a lot of prevalent routers.
  • It is a versatile option for increasing WiFi coverage with various setups.

Victony WA305 Extender Setup-Manual Method

  1. Wait for the LED to turn on after plugging in the Victony WA305 Extender.
  2. Connect the device to the WiFi network of the extender.
  3. Open a browser, then enter “ap.setup”.
  4. Use the default login information, which is often “admin” for both the username and password.
  5. To choose an already-existing WiFi network and enter a password, follow the on-screen instructions.
  6. Extender has been set up and prepared for increased coverage.

Note: If you need any assistance regarding your wavlink wing 12m wifi extender login, contact our technician or visit the official website, that is ap .setup

Victony WA305 Wifi Range Extender Setup-WPS Method

  1. After connecting in the Victony WA305 Extender, watch for the LED to stabilise.
  2. Click the WPS button located on the extender.
  3. Press the WPS button on your router after two minutes.
  4. Wait for the extender’s WPS LED solid.
  5. Use the default SSID and password to connect to the extended network.
  6. Take advantage of hassle-free, expanded WiFi coverage.

Common issue for victony WA305 extender setup

  • Users may have trouble putting up the extender to connect to their present WiFi network.
  • The possibilities for this include reduced signals, interference, or faulty network settings.
  • If the extender doesn’t function as intended during the setup process.
  • it may be due to incorrect configuration settings.
  • This could include picking the incorrect mode.
  • entering an improper SSID or password,
  • then neglecting to change important settings.
  • The signal may be disrupted and the extender may experience connectivity problems due to interference .
  • nearby Wi-Fi networks or other electrical devices.
  • By picking the best channel and placing the extender
  • away from interference sources, you can decrease this issue.
  • If the extender’s firmware is outdated,
  • there may be compatibility problems or performance-affecting defects.
  • Users should be sure to check every so often for upgrades to the firmware. and


  1. Place your victony wifi extender in the same room as your router.
  2. Using an electrical outlet, plug in your wifi range extender and router.
  3. Make sure your extender isn’t linked to the internet with an ethernet cable.
  4. Examine the LED light on your extender. When only one of the power lights blinks, your router is ready to bind.
  5. The victony range extender allows you to connect to the internet.
  6. After that, you’ll be able to quickly navigate the website.

Login Victony WA305 Extender

  1. Make a WiFi connection using the Victony WA305 Extender.
  2. Enter “ap.setup” in the address bar of an open web browser.
  3. Use the standard username and password to log in, which are usually “admin” for both.
  4. Go to the setup options and settings of the extender.
  5. Adjust the settings if needed to get the best results.

Victony WA305 Extender-Firmware Update

  1. Join the network of the Victony WA305 Extender.
  2. Enter “ap.setup” in the address bar of an open web browser.
  3. You can log in by entering your password and username.
  4. Find the option for firmware updates by going to the settings menu.
  5. Go to the Victony website to download the most recent firmware.
  6. Using the interface on the extender, upload and install the firmware upgrade.

Victony WA305 Troubleshooting Steps

  1. Make sure the LED indications are on and the extender is powered on.
  2. Verify that your device is connected to the extender’s network.
  3. Reconnect devices to the network and give the extender a restart.
  4. Inspect the space between the extender and router for any physical impediments.
  5. If problems continue, follow the directions in the handbook to do a factory reset.

Reset Process Victony WA305 Extender

  1. Find the Victony WA305 Extender’s reset button.
  2. Hold down the reset button for approximately ten seconds.
  3. As soon as the LED indicators begin to flash, release the reset button.
  4. Wait for the reboot and factory reset of the extender.


As a DIGITALTECHSIDE author, the majority of our articles have been focused on technology, blogging, business, lifestyle, social media, web design and development, e-commerce, money, health, education, entertainment, SEO, travel, and sports. Contact us at if you have questions of anything.